Spring washers are locking washers that are used when there is a need to prevent a fastener from loosening as a result of vibration. They are also often called split lock or split ring washers.
A spring washer has a split in the washer section that when tightened each side of the split bites into the nut and the mounting surface. This “bite” prevents any anti-clockwise rotation from occurring under vibration.
The term “square section” refers to the end section of the split in the spring washer.
About BZP Metric Thread
The most common thread type in production today. Usually specified as M then a number x another number. This signifies the thread diameter and the length of the fastener.
For example, M4 x 30 means that the major thread diameter (the external distance across the outside of the thread) is 4mm and the length is 30mm. Length is usually measured from the underside of the fastener head.
A BZP or bright zinc plated fastener is one which has a thin coating of zinc added during production. This protective coating adds durability by protecting the product against rust or oxidisation.
This section of our guides and tips hub is home to a large variety of informational articles on our expansive range of washers. Articles range from answering frequently asked questions about our washers, to providing specification details on products. If you can't find the information you are looking for here, please don't hesitate to contact us!