Self Drilling Screws - Pan Head Phillips

10G (4.8mm) x 13mm - Self Drilling Screw Pan Phillips DIN 7504N - BZP - Pack of 250

These Pan Head Phillips self-drilling screws are a light-duty self driller often used when fixing to metal framing.

Self-drilling screws are a type of self tapping screw with a drill point at the end. This eliminates the need for a hole to be pre-drilled and enables the fastener to be fixed in one operation.

The drilling point of a self-drilling screw is given a number - the higher the number the thicker the material it is able to self drill into.

As a guide if you don’t know the number of the drill point on the screw you can measure the length of the drilling tip and this will give you an approximate maximum thickness of material it can drill through. We would recommend caution when using this method as if the thickness of the material being drilled exceeds the length of the drilling tip it can cause the screw to jam and tear the head off – it is always best to err on the side of caution.