About our Blind Rivet Nuts range:

We have various types of blind rivet nuts to go with our blind rivets:

• Round Thin Sheet – Ideal for use on materials with a reduced thickness. These are sometimes called reduced countersunk as the nut gives a flush finish within a pre-drilled countersunk hole. It is not always necessary to create the countersink if the application does not require it, as round thin sheet rivet nuts will almost fit flush without a countersink.
• Large Flange Head – the flat-head can be used for load-bearing applications, as the large flange reinforces the hole and increases the push-out resistance. The head can also be used as a spacer.
• Countersunk Head – this type of rivet nut (also called countersunk rivet nut), has a visible 90 degree countersunk and requires a pre-drilled countersunk hole to enable it to fit flush. This style should not be confused with the Reduced Countersunk Head which has only a slight countersink.
• Half-Hex Thin Sheet – this type of rivet nut is inserted into a hexagon hole which eliminates the potential problem of the nut turning in the hole after installation.
• Rivet Nut Tools – we have a wide range of tools available to set all types of rivet nuts into position.
  Please note that we have various material options available within our stock, namely zinc-plated, aluminium or stainless steel.