The term “Nyloc” is an abbreviation for nylon insert self-locking nut.
Nyloc nuts feature a nylon collar in the top portion of the nut that locks the nut in place by squeezing the threads of the bolt as the nut is tightened. This friction that is created prevents the nut from loosening.
Nyloc nuts can be re-used but it is not advisable, as their efficiency is reduced with every application, until eventually they become ineffective. The effective operating temperature of Nyloc nuts varies by manufacturer but as a rule of thumb we would advise extremes of -40C to +120C.
The difference between and Type P and a Type T nyloc nut lies in the physical "depth" of the nut.
Type T nyloc nuts are referred to as thin as shown here. This designation is used for all thread and material types.
The thread on this type of nut can often (but not always!) be identified by the colour of the nylon insert, with blue signifying metric and white for imperial threads. For further information please take a look at our guides and tips section.
Flanged Nyloc nuts are also available, please click on the link to view the range.
A Type T nyloc nut is a thin type of nyloc nut and should be chosen if the nut is going to be installed in a restricted space.
Metric fine thread is a common thread, often found on machine screws. More threads per axial distance (length along the fastener) than metric coarse. A fine thread is known to be stronger than a coarse thread.
This section of our guides and tips hub contains a large variety of informational articles relating to all of the products within our nuts and bolts ranges. These articles range anywhere from providing product specification details to answering frequently asked questions about specific products.
